Description
The 14mm by 3 3/8″ belt is the same that the top fuel racers use on their 600 plus horsepower machines. This kit is designed for oil filter (included) mounting in the motor plate. Kit is the complete drive with outboard bearing supports. The outboard bearing support has one bearing to support the transmission main shaft. The outboard support plate is reversible. The back side is channelled for another distinct look, but just the flat side will be polished.
- 14mm x 85mm (3 3/8″) wide belt, the same belt as used on top fuel Harley-Davidson® race bikes
- Kevlar™ clutch has nine 6 3/8″ diameter frictions & eleven steels for ultimate power transfer
- Specially manufactured pressure plate uses up to 9 springs for infinite clutch pressure control
- Hub is manufactured from 7075 aluminium and hard anodized for maximum strength and longevity
- 30-46 tooth combo provides 1.53:1 drive ratio
Belt Drives Ltd.
Polished Kit with Outboard Bearing Support (Top Fuel Street Drive)
Fits Softail 1990/2006
By: BELT DRIVES LTD
| A | Rear Basket FOR TOP FUEL DRIVES ONLY | TFRP-46 |
| B | 30 Tooth Front Pulley FOR TOP FUEL DRIVES ONLY | TFFP-30 |
| C | 14mm 85 tooth 85mm wide belt for TF Drives | BDL-14-85 |
| D | Clutch Hub FOR TOP FUEL DRIVES ONLY | TFCH-180 |
| E | Complete Clutch Kit (includes fibers and steels) | TFCPS-100 |
| F | Pressure Plate For Top Fuel Drives | TFSS-PP |
| G | Hub Nut with Seal (NO LONGER AVAILABLE) | HNS-100 |
| H | Adjusting Screw and Clutch Hub Nut | CDAS-100A |
| I | Shoulder Bolts Set of 9 | CDSB-100 |
| J | Replacement Coil Springs set of 6 | ECS-100 |
| K | 1/2″ Insert and Nut | IN-500 |
| L | Hardware Kit for TF drive | TFHK-2000 |
| M | Softail® Motor Plate | TFMP-100 |
| MB | Motor Plate Bearing | MPB-9 |
| N | Starter Housing | TFSH-100 |
| O | Bearing Support Plate for TF-2000 | TFSG-400 |
| P | Oil Filter | OF-1 (Fram No. PH6022 |
| Q | Starter Pinion Gear | PG-100 |
| R | Standoffs for Top Fuel Drive | TFSO-100 |
| S | Front pulley cover for TF-2000 | TFFPC-2000 |
| T | Rear clutch cover for TF-2000 | TFRPC-2000 |
| U | Bearing covers (sold in set of 2) | TFBC-100 |
| V | Sealed Bearing (only one needed) | TFBSB-100 |
| W | Ring Gear | SG-2 |
Reviews
There are no reviews yet.